Search Results

Using Thermal Simulation to Model the Effects of Wind on the Mars Curiosity Rover Quality and Validation of Digital Designs for Aerospace and Defense Scaling LiDAR Optical Payloads from Drones to Miniature UAVs Using Sintered Fiber Metal Composites for Aircraft Acoustic Attenuation GaN Breaks Barriers RF Power Amplifiers Go Wide and High Test System Ensures Flawless Performance of Military RF Devices The Impact of Video Compression on Remote Cardiac Pulse Measurement Using Imaging Photoplethysmography Remote physiological measurement technique leverages digital cameras to recover the blood volume pulse from the human body. Sensitivity Simulation of Compressed Sensing Based Electronic Warfare Receiver Using Orthogonal Matching Pursuit Algorithm Calculate the sensitivity of a CS based EW receiver using two modulation schemes.

On-Orbit Satellite Refueling Flow Measurement The Path from Concept to Operational Status Radiation Tolerant "Smart Backplanes" for Spacecraft Avionics Using Heat Pipes to Cool Embedded Computers Electronically Dimmable Aircraft Windows How do you block the light of the sun? Eliminating Electrical Arcing in Satellite Systems NASA Miniaturizes Century-Old Radio Sounder Technology Developing an Airborne Optical Systems Testbed (AOSTB) New Class of Excimer-Pumped Atomic Lasers (XPALS) Research demonstrates the viability of an atomic laser having a quantum efficiency greater than one. Hydrodynamic Drag Force Measurement of a Functionalized Surface Exhibiting Superhydrophobic Properties Comparing the skin friction drag effects of a superhydrophobic flat plate to an untreated flat plate of the same material and geometry.

Small Form Factor Embedded Systems New Technologies Drive Diverse Solutions Making Laser Weapons a Reality Modelling and Simulation Tools for Systems Integration on Aircraft Rotorcraft Anti-Icing Systems Redundant Transmitting System in Aircraft (RTSA) Cassini Stays in Touch with NASA's Radio Science Subsystem Laser Integration on Silicon Photonic Circuits Through Transfer Printing New fabrication approach allows the massively parallel transfer of III-V coupons to a silicon photonic target wafer. High Energy Computed Tomographic Inspection of Munitions Inspection system provides additional level of quality assurance for R&D, reverse engineering, and malfunction investigations. Terahertz (THz) Radar: A Solution for Degraded Visibility Environments (DVE) Operating at higher frequencies than other types of radar produces tighter beams and finer resolution. Imaging Detonations of Explosives Using high-speed camera pyrometers to measure and map fireball/shock expansion velocities.

Tackling NVH one dB per day New tools and technologies are helping engineers reduce vehicle Noise, Vibration and Harshness. Artificial intelligence becomes a reality Automakers could be among the leaders in deploying AI in free-standing, high-reliability environments. But developers must determine how to mitigate undesirable side-effects. Lidar: autonomy's mission-critical component Automated-driving capability likely won't happen without Lidar. But what technology-and at what price? Formula One goes longer, lower, wider for 2017 New rules make the cars faster and more aggressive-looking, with a wider track, wider tires and bigger wings. Editorial: Core Ford, New Ford...OneFord? SAE Standards News Seeking a common language for vehicle automation Supplier Eye Are you innovating for NVH?

Interoperability Standards Pave the Way for Modular Robotic Manipulators Solar Powering UAVs Deploying COTS Subsystems in UUVs Developing a Multi-Modal UGV Robot Control Interface Fast-Tracking Autonomous Vehicles with Simulation Gesture-Based Controls for Robots: Overview and Implications for Use by Soldiers Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings Experimental Confirmation of an Aquatic Swimming Motion Theoretically of Very Low Drag and High Efficiency The Scaling of Loss Pathways and Heat Transfer in Small Scale Internal Combustion Engines A Guide for Developing Human-Robot Interaction Experiments in the Robotic Interactive Visualization and Experimentation Technology (RIVET) Simulation

WCX17 Preview The annual SAE World Congress is rebranded WCX17 to express its expanded experience of new-technology discussion and established thought leadership. Achates powers toward production Achates Power's internal-combustion solution is a new play on an old technology. Inside the Bolt EV While the new battery deserves credit for the car's +200-mile range, systems optimization, careful motor design and proprietary CAE tools were equally important. CES 2017: Lush luxury EVs, sophisticated connectivity Suppliers challenge OEMs in advanced tech. Editorial: Question mark or exclamation point Supplier Eye Are you prepared for greater electrification? SAE Standards News VS committees fully engaged on cybersecurity.

Thought leadership at WCX17 Magna's CTO talks innovation and disruption at WCX17, the newly rebranded SAE World Congress. Patton's new campaign As new SAE International President for 2017, Doug Patton will advocate STEM, "cultivation" of prospective young engineers. New EEAs for the connected, autonomous future OEMs and their Tier-1 partners are revamping vehicle electronic and electrical architectures with "über brain" central computers and real-time Ethernet to feed tomorrow's data-hungry cars and trucks. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Autonomy, connectivity headline the 2017 Consumer Electronics Show The automotive component of CES expands as global anticipation for automated driving and enhanced connectivity intensifies. Editorial: Vital Transformation Supplier Eye The impact of shifting to the 'softer' side.

Additive Manufacturing How 3D Printing Will Transform the A&D Support Chain Advances in Lightweight Electronics Protection Conformal Coatings Increase Reliability of Aerospace and Military Assemblies Powering Outer Space An In-Depth Look at Aerospace Battery Technology Using High Bandwidth Oscilloscopes to Analyze Radar and Electronic Warfare Systems Bio-inspired Airborne Infrastructure Reconfiguration (BioAIR) EMI Analysis Software Helps Telescope Group Simulate RFI Mitigation Epitaxial Growth of Rhenium with Sputtering Processing and Characterization of Polycrystalline YAG (Yttrium Aluminum Garnet) Core-Clad Fibers Multi-Scale Analysis of Deformation and Failure in Polycrystalline Titanium Alloys Under High Strain Rates Abrasion Testing of Products Containing Nanomaterials Spectrum Fatigue of 7075-T651 Aluminum Alloy under Overloading and Underloading

The comeback car The Cal Poly Pomona FSAE Team implements several measures to help overcome setbacks and achieve a podium finish at Formula SAE Lincoln. Going deep The uBox concept car developed as part of Clemson's Deep Orange program features a uniquely formed roof part. Creating a monster North Dakota State University SAE Clean Snowmobile Challenge team brings to life a war-torn engine pieced together with parts from another.

Seeing the Light Achieving Full-Color, Day or Night Readability for Flat-Panel Displays Multiple Node Networking Using PCIe Interconnects PCI Express (PCIe) interconnects, and how they can be used to support multiple node low latency data transfers over copper or optical cables, is gaining momentum in embedded computing solutions. Zero-Emissions Electric Aircraft Theory vs Reality Analyzing Radar Signals With Demodulation Combining Software and Hardware for Highly Specialized Multichannel Spectrum Monitoring Advanced Thermal Management Solutions Thermoelectric Cooling Thermal Ground Planes Thermal Management of Laser Diodes The Effect of Substrate Emissivity on the Spectral Emission of a Hot-Gas Overlayer Process Approach to Determining Quality Inspection Deployment Experimental Setup to Assess Blast and Penetration-Induced Secondary Debris in a Military Operations in Urban Terrain (MOUT) Environment Non-Contact Circuit for Real-Time Electric and Magnetic Field Measurements

Digital Design Tools Simulating Thermal Expansion in Composites with Expanded Metal Foil for Lightning Protection Rugged Computing Designing VME Power Systems with Standard Modules Optical Sensors Optical Ice Sensors for UAVs Rotorcraft Technology Rotorcraft Icing Computational Tool Development RF & Microwave Technology Curled RF MEMS Switches for On-Chip Design: Design Software Supports BAE System's Mixed-Signal Chip Design

New dawn at Honda R&D President Yoshiyuki Matsumoto aims to invigorate Honda's technology and product-development organization with 'full soul.' Automated driving meets regulation: NHTSA and the next 50 years The challenges and opportunities on the road to 'zero deaths' demand a new level of federal automotive safety technical standards, and a new safety-defect reporting and recall system. NHTSA and the U.S. Congress must act boldly and quickly to make it happen. Autonomous driving meets regulation: Hands off, eyes off, brain off Euro NCAP'S president warns that without coherent policies, the growing availability of automated technologies may result in piecemeal technology development-and unintentional consequences. Designer yin meets engineer yang Efficient and effective vehicle development means even closer collaboration between the two former sparring partners.

Defying the disruptors and driving innovation Four top engineering executives discuss how their "traditional" companies are finding new technology opportunities and business growth amid the start-ups-and are even doing some disrupting themselves. Preparing for a 48-volt revival The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Additive manufacturing enhances GTDI pistons Selective Laser Melting may help manufacture future gasoline-engine pistons with enhanced heat-transfer properties and reduced weight.

Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.

Diesel gets a promotion at SAE Clean Snowmobile Challenge The main rules change for the 2015 season is creation of a new engine category (diesel), the event's organizer notes in providing an overview of the SAE Collegiate Design Series competition. Wisconsin-Stout puts faith in gearbox redesign for Baja Blue Devil Racing Team believes packaging and durability advantages more than offset weight and low-end-torque penalties. Test cell at Kansas University does double duty Single-cylinder engine test cell designed for research into biodiesel also serves as an instruction tool for students. University of Michigan students have hand in Volt battery reliability Technology co-developed by U of M monitors the quality of welds used in the joining of Chevy Volt battery cells.

Getting a grip on AWD efficiency The safety and performance benefits of all-wheel drive are undeniable, but so are the penalties of added weight, friction losses, and complexity. Clever axle disconnects and E-axles are driving future AWD developments. E pluribus unum Inputs from many sensors are being combined to give safety systems a true vision of vehicle surroundings, with the resulting sensor fusion becoming a mainstay of autonomous vehicle electronics. Lightweighting poses repair challenges Mass-produced aluminum bodies and mixed-material structures present challenges for assembly and repair, as automakers increasingly pursue these lightweight strategies. Setting the standard Meggitt CTO Emeritus begins term at helm of SAE International, seeks to encourage cross-sector relations, elevate image of SAE as aerospace industry leader.

Hard to answer Technical and personal issues make it challenging to link smartphones to vehicles. New OGeco hybrid transmission is a space-saver Finding space for an electric motor, battery, and all the controls that go with them while still providing sufficient 5-passenger cabin room and trunk/luggage capacity is a challenge. Mazda enters subcompact crossover segment Mazda dove into the burgeoning market for subcompact crossover SUVs with the 2014 Los Angeles Auto Show introduction of the CX-3, a stylish new tall wagon built on the platform of the new Mazda2/Demio.

Buckeye Current's TT triumph The Ohio State University reprised its third-place finish in the 2014 TT Zero for all-electric motorcycles, beating some of the pros on the world's toughest race circuit. Kettering FSAE team improved as season progressed Lowest priced may not mean the best, but certainly not the worst. Leveling the field: getting #girlsinstem Despite facing the brunt of gender segregation, women are forging ahead and dramatically improving STE M, both academically and professionally. Mercedes-AMG's SLS departure opens door to new GT Powering the car is an all-new biturbo 4.0-L V8 available with two power levels: hot (GT) at 340 kW (456 hp) and exceedingly hot (GTS) at 375 kW (503 hp).

Europe's aerospace industry looking confident Apart from Airbus's highly visible presence in defense and commercial aircraft, Europe also has successful capabilities in helicopters, business jets, and aero engines, and in all these areas their global market share is growing. Comparing blade-element momentum modeling to 3-D CFD Many small unmanned aerial vehicles (SUAVs) are driven by small scale, fixed blade propellers, and the flow produced by the propeller can have a significant impact on the aerodynamics of the SUAV itself.

Into the DEAP The Distributed Electrical Aerospace Propulsion project looks toward a future optimized integrated propulsion system that will allow cleaner, quieter, and more efficient performance incorporated into a radically innovative airframe that will feature enclosed electrically powered fans.